It is the question we are asked most often before an order is placed: the drawing says “aluminium tape”, the store has two silver rolls on the shelf, and nobody is sure which one belongs on the duct. The two products look almost identical. They are not.<\/p>\n
Below is a straight comparison between Q Tape Aluminum FSK Tape and Q Tape Aluminum Foil Tape, using the numbers from their own data sheets, followed by a simple rule for choosing between them.<\/p>\n
Aluminium foil tape is exactly what the name says: a layer of aluminium foil coated with adhesive. FSK tape takes that same foil and laminates it to a fibreglass scrim<\/strong> and a kraft paper backing<\/strong>. That extra reinforcement changes almost every mechanical property of the finished tape — and it is why the two are not interchangeable on a specification.<\/p>\n FSK is roughly twice as thick and carries about 37% more tensile strength, but the figure that decides most arguments is elongation: 2% for FSK against 5% for foil<\/strong>. Less stretch means the tape stays where it was placed. Across a long duct run that goes through daily thermal cycling, a tape that creeps is a tape that eventually opens at the edge.<\/p>\n That same flexibility is an advantage the moment the surface stops being flat. Plain foil tape stretches into a radius, wraps a pipe elbow, and follows an irregular fitting without wrinkling or tenting. Try to force FSK around a tight bend and the scrim will fight you, leaving bridged edges that never fully bond.<\/p>\n Foil tape shows the higher adhesion to steel (27.04 vs 23.2 N\/25mm), while FSK shows more than double the initial adhesion reading (8.5 cm vs 4 cm on PSTC-6 \/ ASTM D 3121). In practice: FSK grabs harder the moment it touches the facing, which is what you want when you are working overhead on duct wrap; foil builds a slightly stronger ultimate bond on bare metal.<\/p>\n Both products return a flame spread and smoke developed index of zero, but they are tested under different standards — FSK to ANSI\/UL723, foil to ASTM E84-21a. If your specification names one of those standards explicitly, match it. A consultant reviewing a submittal will check the standard, not only the score.<\/p>\n Choose Aluminum FSK Tape when:<\/strong><\/p>\n Choose Aluminum Foil Tape when:<\/strong><\/p>\n Both tapes use the same high-strength solvent acrylic adhesive<\/strong> and share the same tested service range of −30 °C to 120 °C<\/strong> (ASTM C1136), with an application range of −12 °C to 120 °C. Both are manufactured in the Kingdom of Saudi Arabia to the same process, so a project that approves one will find the other consistent in quality.<\/p>\n If you are still deciding, the safe answer on a faced-insulation package is FSK for the straight work and a roll of foil tape on the van for the fittings. Most experienced HVAC crews carry both.<\/p>\n Full specifications are published on each product page — Aluminum FSK Tape<\/a> and \u0634\u0631\u064a\u0637 \u0623\u0644\u0645\u0646\u064a\u0648\u0645 \u0641\u0648\u064a\u0644<\/a>. New to FSK? Start with our guide to what FSK tape is and how the three layers work<\/a>. For prices, send us the widths, lengths and quantities and our team will issue a quotation; samples are available for consultant approval.<\/p>","protected":false},"excerpt":{"rendered":" Two silver rolls, one drawing that just says aluminium tape. A side-by-side comparison using the tested figures, and a simple rule for choosing between them.<\/p>","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[134],"tags":[],"class_list":["post-37319","post","type-post","status-publish","format-standard","hentry","category-hvac-insulation"],"_links":{"self":[{"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/posts\/37319","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/comments?post=37319"}],"version-history":[{"count":1,"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/posts\/37319\/revisions"}],"predecessor-version":[{"id":37324,"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/posts\/37319\/revisions\/37324"}],"wp:attachment":[{"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/media?parent=37319"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/categories?post=37319"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/qtape.ca\/ar\/wp-json\/wp\/v2\/tags?post=37319"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}Side by side<\/h2>\n
\n\n
\n \nProperty<\/th>\n Aluminum FSK<\/th>\n Aluminum Foil<\/th>\n<\/tr>\n<\/thead>\n \n Backing<\/td>\n Foil + fibreglass scrim + kraft<\/td>\n Aluminium foil<\/td>\n<\/tr>\n \n Total thickness<\/td>\n 180 microns (7.1 mils)<\/td>\n 93 microns (3.66 mils)<\/td>\n<\/tr>\n \n Tensile strength<\/td>\n 197.01 N\/25mm<\/td>\n 143.77 N\/25mm<\/td>\n<\/tr>\n \n Elongation<\/td>\n 2%<\/td>\n 5%<\/td>\n<\/tr>\n \n Adhesion to steel<\/td>\n 23.2 N\/25mm<\/td>\n 27.04 N\/25mm<\/td>\n<\/tr>\n \n Initial adhesion<\/td>\n 8.5 cm<\/td>\n 4 cm<\/td>\n<\/tr>\n \n Fire test method<\/td>\n ANSI\/UL723 & UL724<\/td>\n ASTM E84-21a<\/td>\n<\/tr>\n \n Flame spread \/ smoke<\/td>\n 0 \/ 0<\/td>\n 0 \/ 0<\/td>\n<\/tr>\n \n Adhesive<\/td>\n Solvent acrylic<\/td>\n Solvent acrylic<\/td>\n<\/tr>\n \n Service temperature<\/td>\n −30 °C to 120 °C<\/td>\n −30 °C to 120 °C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n What those numbers mean on site<\/h2>\n
Strength and stability: FSK wins<\/h3>\n
Conformability: foil wins<\/h3>\n
Adhesion: read both figures together<\/h3>\n
Fire testing: same result, different standard<\/h3>\n
The simple rule<\/h2>\n
\n
\n
What they have in common<\/h2>\n
Data sheets and pricing<\/h2>\n